Description
30 amp 60 volt variable DC power supply is designed with the capability to adjust both voltage and current parameters, offering flexibility for diverse electronic components and projects. Its regulated nature guarantees a stable output, safeguarding connected devices from voltage fluctuations.
Specification
| Model | ATO-JK6030K |
| Input Voltage | Single Phase 110V or 220V AC (+/- 10%) |
| Output Voltage Range | 0-60V |
| Output Current Range | 0-30A |
| Output Power | 1800W |
| Frequency | 50Hz/60Hz |
| Adjustable Mode | Pulse Width Modulation (PWM) Type |
| Transistor Connection Method | Full Bridge |
| Output Type | Dual |
| Display | 3 digit |
| Display Accuracy | Output Voltage ±0.5%, Output Current ±0.5% |
| Efficiency | >86% |
| Load Regulation (CV) | Stable Voltage ≤0.5%, Constant Current ≤0.5% |
| Line Regulation (CV) | Stable Voltage ≤0.5% |
| Ripple Voltage | ≤1% |
| Insulation Resistance | Input-Output: ≥20MΩ |
| Input-Chassis: ≥20MΩ | |
| Output-Chassis:≥80MΩ | |
| Dielectric Strength | Input-Output: AC1500V, 10mA, 1 minute |
| Input-Chassis: AC1500V, 10mA, 1 minute | |
| Output-Chassis: AC1500V, 10mA, 1 minute | |
| Protection | Over Load and Over Voltage Protection |
| Current Imbalance | ≤5% + 0.5A |
| Operating Ambient | -10℃ to + 45℃/ 85%RH |
| Storage Ambient | -20℃ to + 70℃/ 80%RH |
| Overheat Protection Ambient Threshold | 70℃ to 80℃ |
| Mean Time Between Failures | ≥50000h |
| Cooling Duct | Internal Cooling Air Duct Forward and Exit |
| Certification | CE |
| Warranty | 12 Months |
| Size | 303 (L) x 255 (W) x 155 (H) mm |
| Weight | 13kg |
Detail
Tips: Can a variable DC power supply be used for charging batteries?
Yes, a variable DC power supply can be used for charging batteries. It allows you to adjust the output voltage to match the charging requirements of the specific battery. It is crucial to set the voltage and current levels within the battery’s recommended charging parameters to prevent overcharging, overheating, or damage. Ensure that the power supply provides a stable and regulated DC output to maintain the battery’s health and longevity. Additionally, monitoring the charging process and disconnecting the power supply once the battery is fully charged is essential to prevent overcharging, which can lead to reduced battery life or safety hazards. Always refer to the battery manufacturer’s specifications and guidelines when using a variable DC power supply for charging.
Reviews
There are no reviews yet.