Description
The high performance handheld digital panel meter integrates a number of intelligent features, automatic calibration and recognition of TEDS sensor parameters, real-time capture of peaks and valleys, high-speed sampling rate of 2000Hz, high-speed sampling rate up to 12800Hz. support for wireless calibration, a key to restore the settings. It supports wireless calibration and key restoration settings. It has a wide display range from -99999 to 999999, and provides multiple alarm modes to meet the needs of complex on-site force measurement.
Specifications
| Model | ATO-DY920-H | ATO-DY920-J |
| Sampling Rate | High speed version 2000Hz | Extreme version 12800Hz (six speeds selectable) |
| Range | Unlimited external sensor range | |
| Accuracy | 0.1% | 0.05% |
| Resolution | 0.01% | |
| Display Bits | 5 digit (including decimal point) | 6 digit (including decimal point) |
| Display Unit | kN/kg/lb/N/g/N-m | |
| Housing Material | Aluminum alloy | |
| Non-linear | Meter better than 0.01% | |
| Display Division | -99999 ~ 9999999 | |
| Signal Input | -15~+15mV | |
| Display | 4-inch color electric touch display | |
| Temperature Drift | Less than 20ppm | |
| Built-in Battery | 3200mAh battery, full battery life of 10 hours of continuous operation, low battery reminder | |
| Sampling Rate Adjustment | 50Hz~12800Hz Six adjustable levels | |
| Display Interface | Real-time curve, historical curve/table, peak and valley value display, switchable video screen | |
| Real-time Monitoring | Automatically capture peaks and valleys, analyze sensor status | |
| Setting Parameters | Backup and restore, one-key restore | |
| Wireless Calibration | Simply enter the sensor parameters to complete the calibration | |
| Smart Sensor | Automatic calibration and modification of the corresponding units and decimal points (TEDS Smart Sensor) | |
| Connecting Cables | Use TYPE-C cable (optional RS485) to connect directly with PC to export simulation data. | |
| Interface Test Interface | View self-eye, wireless communication test data | |
| Data Saving | Peak and valley value history data save 200 groups, power down not lost | |
| Alarm Mode | Peak alarm, lower limit alarm, peak and valley value alarm, over-range network letter self-test alarm | |
| Capture Mode | Threshold-Threshold, Threshold-Time, Threshold-Keypad |
Dimension (unit: mm)
Details
Wiring Diagram
Sampling Speed
The higher the sampling speed, the closer the measured value is to the actual value. ATO digital panel meter adopts high-performance acquisition chip, the acquisition speed can reach 12800Hz.
Application
Tips: Handheld digital panel meter features
- Handheld digital panel meter sampling rate of 50Hz to 12800Hz six adjustable, high sampling rate to capture the peak more accurately.
- Real-time curve and the last historical curve selection display, view the working process of the force situation.
- Real-time automatically capture the peak and valley values of the equipment, analyze the status of the sensor.
- Parameter backup and recovery, modify the parameters can also be restored with one key.
- No weight calibration, just enter the sensor parameters to complete the calibration.
- Digital panel meter using TEDS intelligent sensor, power on automatic calibration, modify the corresponding unit and decimal point low battery when the meter interface shows low battery logo, plug in the charger shows charging logo, charging light indicator.
- Use TYPE-C cable (optional RS485) to connect directly with the PC for Modbus communication, easy to export force data.
- Multiple alarm options, upper limit alarm, lower limit alarm, peak/valley alarm, 1.2 times over-range automatic alarm.
Reviews
There are no reviews yet.