Description
High precision explosion-proof temperature and humidity sensor has the advantages of anti-impact and anti-aging. The external mounting hole is easy to install, which makes the response speed of the temperature and humidity sensor fast.
Specifications
| Model | ATO-ME-WS-GB |
| Power Supply | 10-30V DC |
| Resolution | Temperature: 0.1℃; Humidity: 0.1%RH |
| Accuracy | Temperature: ±0.2℃ (at 20℃) |
| Humidity: ±2%RH (10%RH-80%RH); ±3%RH (0%RH～10%RH; 80%RH～100%RH) (at 20℃) | |
| Measurement Range | Temperature: -40℃～80℃; -20℃～60℃ (with Display) |
| Humidity: 0%RH～100%RH | |
| Response Time | <200mA |
| LCD Refresh Rate | <1.2s |
| Output Mode | 4-20mA (Included Two Signal: Humidity+Temp, 5 Wire); RS485 |
| Installation Method | Wall-mounted, Fixed on the Wall |
| Enclosure/Protection Level | Cast aluminum, IP66 (Without Probe) |
| Explosion-Proof Mark | Exd IIC T6 GB |
| Explosion-proof Certification | CNEX |
| Electromagnetic Compatibility Standard | EN 61000-6-1; EN 61000-6-3; EN 61000-3-2; EN 61000-3-3 |
Dimension （Unit: mm)
Wiring
Tips: Precautions For Explosion-proof Temperature and Humidity Sensor Use
- To turn the screw on the top cover, press the screw with a screwdriver and then turn the screw.
- When connecting terminals, do not strip the cables too long, and do not expose the copper wires directly inside the product to avoid short-circuit risks.
- Disconnect the power supply before connecting the circuit.
- Do not touch internal components directly with hands or metal objects.
- After the installation is complete, check the screws on the cover and whether the waterproof connector is locked. The wire diameter must be 4-8mm.
- 5 minutes after switching on the power supply, the calibration operation will be carried out. Otherwise, the data output will not be accurate.
Reviews
There are no reviews yet.