Description
600 W 3 phase BLDC motor matches with worm gearbox providing high torque at 24V, 36V or 48V power supply, gear ratio from 7.5:1 to 100:1 available, high speed and high performance.
Specification
| Motor Model | ATOD110BLD600-24A | ATOD110BLD600-36A | ATOD110BLD600-48A |
| Motor Type | BLDC Motor | ||
| Power | 600W | ||
| Voltage | 24V DC | 36V DC | 48V DC |
| Rated Current | 31.25A | 20.83A | 15.63A |
| No Load Current | ＜7.5A | ＜5A | ＜3.8A |
| No Load Speed | 2700 rpm | ||
| Rated Speed | 2000 rpm | ||
| Rated Torque | 1.91N·m | ||
| Peak Torque | 5.73N·m | ||
| Motor Dimension | 110mm | ||
| Shaft Diameter | 11mm | ||
| Construction | Permanent Magnet | ||
| Direction of Rotation | CW/CCW | ||
| Certificate | CCC, CE, ROSH, LVD, EMC | ||
| Gear Ratio | 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 | ||
| Recommended Drive Model | ATO-BD100 | ATO-BLD50A | ATO-BLD750 |
| What Parameters of ATO Worm Gear Motors Can Be Customized? | |||
| Power | Yes | ||
| Voltage | Yes | ||
| Speed | Yes | ||
| Shaft | Yes | ||
| Motor Length | Yes | ||
| Motor Lead | Yes |
Allowable Torque with Gear Head
| Gear Ratio | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 |
| Rated Output Speed (rpm) | 267 | 200 | 133 | 100 | 80 | 67 | 50 | 40 | 33 | 25 | 20 |
| Rated Output Torque (Nm) | 17.2 | 22.9 | 34.4 | 44.7 | 54.4 | 63.6 | 68.0 | 54.0 | 60.0 | 52.0 | 40.0 |
Note:
- This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
- The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.
Dimensions (Unit: mm)
Mounting screws are included with gearhead
Speed-Torque Curve
- Instantaneous maximum torque line
The maximum torque momentarily impacts the load when the motor is started.
Beyond this torque, the over-current protection of the driver will cause the motor to stop. - Short time operation area
The motor can run at a short time within this torque range at different speeds.
If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn. - Rated operating torque line
The rated torque of motor running at different speeds, and the motor can run for a long time at this torque. - Continuous operating area
When the motor rotates at different speeds, it runs continuously in this corresponding zone.
Details
Tips: Why does DC worm gear motor produce vibration?
- The motor, worm gearbox and working machine are not fixed well, check the fixing bolts.
- The teeth of the worm gear pair are excessively worn and damaged. It is recommended to replace the worm gear pair teeth.
- The bearing is worn and the gap is large, and it needs to be replaced with a new bearing.
- The bolts are not fixed properly, check the fixing bolts of each part and tighten them.
Reviews
There are no reviews yet.