Description
Dual channel digital oscilloscope is a 2 channels oscilloscope, with 200 MHz bandwidth, 2 GSa/s sampling rate and 8 bits vertical resolution. The DSO oscilloscope has a pass/ fail function and trigger synchronous output function, and current measurement function.
Specification
| Model | ATO-EDS-202C |
| Bandwidth | 200 MHz |
| Channel | 2+ external trigger |
| Sample rate | 2 GSa/s |
| Acquisition model | Sample, Peak detect |
| Record length | 10M |
| Display | 8 inch LCD |
| Waveform refresh rate | 10000 wfrms/s |
| Input coupling | DC, AC, Ground |
| Probe attenuation | 1X, 10X, 100X, 1000X |
| Input Impedance | 1MΩ ± 2%, in parallel with 15pF ± 5pF |
| Max. input voltage | 400V (DC+AC, PK – PK) |
| Bandwidth limit(typical) | 20MHz / Full bandwidth |
| Sampling rate range | 2ns/div ~ 100s/div,step by 1-2-5 |
| Vertical Resolution | 8 bits |
| Sensitivity Resolution | 2mV/div~10V/div |
| Low Frequency（-3db） | ≥10 Hz (at input, AC coupling) |
| Rise time (at input, Typical) | ≤1.7ns |
| Trigger type | Edge |
| Trigger model | Auto, Normal, single |
| Trigger level range | ±6 div from the screen center |
| Automatic measurement | Vpp, Vavg, Vrms, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, DelayA→B , DelayA→B |
| Cursor measurement | ΔV, ΔT, ΔT&ΔV between cursors,auto cursor |
| Dimension | 340*155*70mm |
| Weight | 1.8kg |
Accessories
- Power cable
- USB cable
- Probe
- Probe Adjust
- Quick Guide
Dimension
Details
Tips: Some transient signals of the digital oscilloscope are lost, how to capture and reproduce them?
Set it to single-shot acquisition mode (trigger mode is set to Normal, trigger condition is set to edge trigger, and trigger level is adjusted to an appropriate value, and then sweep mode is set to single-shot mode), note that the storage depth of the oscilloscope will determine your The time at which the signal can be acquired and the maximum sampling rate that can be used.
Reviews
There are no reviews yet.