Sale!

Inhibited Ethylene Glycol 50/50 with OAT-908 — Data Center Coolant

Original price was: £29.00.Current price is: £8.69.

Size:

Packaging:

🚚 Free delivery over £60!

⚡ Fast dispatch

🔒 Secure Payment

⭐ Reliable quality

💬 Helpful customer service

📦 Fast delivery available across the whole country

SKU: 7858635440170 Category:

Description

Inhibited Ethylene Glycol 50/50 with OAT-908 — Data Center Coolant

Premium 50% v/v inhibited ethylene glycol coolant engineered for data centers, hyperscale direct-liquid cooling (DLC) loops, edge-compute thermal management, HVAC chillers, and industrial closed-loop heat-transfer systems. Pre-blended at 50% v/v ethylene glycol in deionized water with the OAT-908 hybrid corrosion-inhibitor package. Conforms to ASTM D3306 industrial coolant corrosion limits. 5+ year closed-loop service life under design conditions.

What is OAT-908?

OAT-908 is a hybrid Organic Acid Technology (OAT) corrosion-inhibitor package combining aliphatic organic acids with selective inorganic synergists (sodium nitrite, sodium molybdate, sodium benzoate) for simultaneous protection of copper, brass, mild steel, cast iron, aluminum, and lead-tin solder in a single fluid. Reduces silicate and phosphate fouling vs. legacy IAT and HOAT formulations.

Climate fit: Minneapolis, Boston, Toronto, Quebec hyperscale, Stockholm, Reykjavik, and any data-center corridor where the loop is exposed to sustained deep-freeze winter conditions. Industry workhorse spec for ASHRAE Climate Zones 6 – 8 and the standard fill for free-cooling loops in northern hyperscale builds.

Performance

Engineered for the same closed-loop applications as premium industrial inhibited ethylene glycol coolants — chilled-water and condenser-water loops, DLC and rear-door heat exchangers, HVAC chiller systems, hydronic process cooling, and freeze / burst protection. Conforms to ASTM D3306 industrial coolant corrosion limits across the same six-metal ASTM D1384 coupon stack used to benchmark long-running inhibited glycol formulations.

Why data-center engineers specify this blend

  • Freeze protection to -37°C (-34°F) at the supplied 50/50 dilution — fits the climate-zone design conditions for the regions above
  • 5+ year closed-loop service life with annual fluid analysis (reserve alkalinity, pH, refractive index)
  • ASTM D3306 conformance across the full ASTM D1384 six-metal coupon stack
  • Hybrid OAT inhibitor reduces heat-exchanger fouling vs. silicate/phosphate IAT formulations
  • Elastomer-compatible with NBR (Buna-N), EPDM, FKM (Viton), HNBR, VMQ silicone, neoprene (CR), and CSM (Hypalon)
  • Made in the USA — blended at our Taylor, Texas facility under documented batch-control procedures with lot-specific Certificate of Analysis
  • Non-DOT-regulated — ships standard freight without hazmat surcharge

Typical specifications (50/50 blend)

Property Typical Value Method
Specific Gravity at 20°C 1.064 – 1.069 ASTM D1298
pH (as supplied) 8.5 – 10.0 ASTM D1287
Reserve Alkalinity 7 – 10 mL 0.1 N HCl ASTM D1121
Freeze Point ≤ -37°C (-34°F) ASTM D1177
Refractive Index at 20°C 1.371 – 1.375 ASTM D1747
Viscosity at 40°C 2.6 – 3.4 cP ASTM D445
Thermal Conductivity at 50°C 0.36 – 0.40 W/m·K ASHRAE 2017 ch.31
Specific Heat at 20°C 0.81 Btu/lb·°F (3.39 kJ/kg·K) ASHRAE 2017 ch.31

Documentation & lot traceability

  • Technical Data Sheet (TDS) — available in the Product Documents tab
  • Safety Data Sheet (SDS) — available in the Product Documents tab
  • Certificate of Analysis (COA) — lot-specific, issued with every shipment

Pack sizes

Available in 1 Quart, 1 Gallon, 5 Gallon pail, 15 Gallon HDPE drum, 55 Gallon HDPE drum, 4 x 55 Gallon Drum pallet, 275 Gallon IBC tote, and 330 Gallon IBC tote — from sample / bench-test quantities up to bulk pallet and IBC orders. For tanker-volume orders please contact sales directly.

Maintenance & make-up

Use only deionized or distilled water (less than 50 µS/cm conductivity, < 25 ppm chloride, < 25 ppm sulfate) for top-up and make-up. Annual fluid analysis is recommended; replace fluid when reserve alkalinity falls below 5.0 mL or pH drops below 7.0.

Pet-safety note: ethylene glycol is highly toxic to dogs, cats, and wildlife if ingested. Clean up spills immediately and store containers out of reach of animals. See the SDS for full hazard, first-aid, and disposal guidance.

Additional information

mycustom

Size#1 Quart>1 Gallon>5 Gallon>15 Gallon>55 Gallon>275 Gallon>330 Gallon~Packaging#1 Quart>2 Quarts>4 Quarts>8 Quarts>1 Gallon>2 Gallons>4 Gallon Case>4 Gallons x 36 Cases>5 Gallon Pail>4 x 5 Gallon Pails>36 x 5 Gallons (Pallet)>15 Gallon Drum>55 Gallon Drum>4 x 55 Gallon Drums>275 Gallon IBC Tote>330 Gallon IBC Tote

Reviews

There are no reviews yet.

Be the first to review “Inhibited Ethylene Glycol 50/50 with OAT-908 — Data Center Coolant”

Your email address will not be published. Required fields are marked *